Production Trucks

SAFETY AND RENTALS

As part of the Production Safety Program, it is strongly recommended that all SFTV students working on productions receive the Truck Loading Safety Badge (see the Safety Badge section of this handbook). This is especially important for Grips and Gaffers who will be loading trucks. It is mandatory for all students working in Camera, Grip and Electric, and Sound on set to receive this badge. 

If you plan on getting carts, you must get a truck with a lift gate. Carts DO NOT fit on UHAUL trucks with ramps. L&G will not let you leave with carts if your truck cannot properly accommodate carts. There will be a fine if L&G has to remove carts from your order. 

Don’t be pennywise and pound-foolish and try to pack your family or friend’s SUV. It is dangerous to you, the vehicle and the equipment. Trucks with lift gates are relatively cheap (around $180/day) and will save you and your crew a lot of time and possible injury. 

INSURANCE 

LMU’s insurance does not cover your production truck. We highly recommend you purchase the insurance from the rental company. This will save you money if there is an insurance claim. 

In California, all drivers must have Liability Insurance. You may provide it through your own personal auto insurance or purchase it from the rental company. 

One of the most popular truck rental companies that students use is Avon Truck Rentals. They have been very supportive of SFTV and offer student discounts. 

Many rental companies will have specific exclusions on coverage(s), i.e. overhead damage as a result of low clearance. Make sure you understand exactly what is and is NOT covered for before you arrive to rent the vehicle. 

WHO’S DRIVING? 

Make sure that the person who is actually going to be driving the truck is listed on the insurance and rental agreement and that they have a valid driver’s license. Do not let any unauthorized driver operate the vehicle – EVER. Confirm with the rental company on how to properly add or change a driver. If possible,  have someone with truck driving experience assist you. 

LOADING AND UNLOADING 

Loading a truck requires some thought and planning. Everything has to go in a certain way. The reason for this is that you have to be able to work off of the truck. 

That’s pretty.

The contents of the truck may shift during travel. Open all doors slowly to avoid being hit by equipment tumbling out. 

The lift gate should be operated by only one person. The operator should give a verbal warning, “going up” and “going down.” Crew not operating the lift gate should stand well clear of the lift. 

Use truck shelves and racks and ratchet straps to tie off equipment. Avon, for example, has shelving available for their trucks – use them. Ratchet straps are available for the Lighting & Grip department. Notify them of your intent to use a truck and they will provide those.  

DRIVING 

Whenever possible – and it is highly recommended – have someone drive with you. They can assist you with visibility and clearance. This is especially important when changing lanes, parking or driving in a tight space. 

Drive slow and take extra precaution. Always allow considerable extra travel time. Driving a truck will take longer than you expected. 

Familiarize yourself with the route you will be taking. Be aware that some freeways re- strict trucks by size and weight. Check with your GPS to confirm you are requesting truck routes. 

Make sure your load is properly secured and evenly distributed. 

Trucks are taller and wider than the vehicles most people are used to driving. Make sure you have proper clearance at all times – if you want to avoid costly damage to the roof and sides of the truck. Overhead damage is usually NOT covered by insurance purchased from the rental agency. 

This truck damage occurred on a recent student film because the driver did not pay attention to the tree branches. This cost the student filmmaker $5,500. 

If the height and width of the vehicle is not indicated on the truck, be sure to get this information from your rental agent or measure it yourself. 

Always use your turn signals and make sure to signal well in advance.  Avoid making sudden stops or abrupt lane changes and obey all traffic signs and lights. 

Trucks don’t accelerate as fast as cars. Be aware of this when you attempt to change lanes. Additionally, sudden movements can cause your load to shift – damaging the items – for which you will have to pay. 

Driving uphill (especially with a full load) will be slow. When appropriate, use “truck- only” lanes; otherwise, stay in the right lane. 

The recommended maximum speed for a loaded truck is 45 mph. Do not attempt to pass a vehicle moving faster than 40 mph. Never pass on hills or curves. 

Trucks weigh three to ten times more than cars and must have more time and  room to stop. You must begin braking sooner, particularly when you have a load. 

Set the hand brake (or emergency brake) every time you park. Turn the wheels away from the curb when parking with the truck faced uphill. When parking with the truck faced downhill, turn the wheels in toward the curb. 

PARKING OVERNIGHT

When parking your rental truck or van overnight you must park on private property in a secure, well lit area. Do not park on the street. Pad lock your rental and safely back the vehicle close to a wall so the lift gate is inaccessible. DO NOT ATTEMPT TO ENTER A PARKING GARAGE WITHOUT KNOWING IF YOUR TRUCK WILL COMFORTABLY FIT.

Your camera and lenses should NEVER be stored overnight in your production truck. Camera and lenses should be taken home EACH NIGHT by the DP and stored in a secured home. 

The safest place to park your production truck is at LMU in the Hannon Lot near the Loyola Boulevard entrance. Drive to the edge of the lot near the trees that border 80th street and safely back your truck into a spot. Weekend parking is free starting at 8:00 PM on Friday. You must pay to park before then.

IF AT ANY TIME DURING THE COURSE OF THE RENTAL YOU HAVE A QUESTION OR CONCERN – TAKE THE TIME TO CALL THE RENTAL COMPANY. THEY WILL BE HAPPY TO ANSWER ANY QUESTION OR CONCERN YOU MAY HAVE. 

Lighting & Grip Check-Out Guidelines

A GUIDE FOR PLANNING YOUR ORDER

Check-out period 

  • Check-outs begin after 1 pm the day of your pick-up.
    • There is a chance your order may not be ready until later, but do not expect it to be ready before 1 pm.
  • Maximum check-out length is 3 days per week.
    • Depending on your course you, may have more production days. Check with your professor. 
  • For check-outs of more than 1 weekend, you must submit multiple reservations, then re-check out your equipment for each weekend.
    • There is no guarantee subsequent orders will contain the exact same gear.  
  • Equipment must be properly returned by 12 pm the Monday following your pick-up to avoid any late fees. 

How to check-out

  1. Locate your gear.
    • It’s either on one of the stages or in a cage.
  2. Speak to an L&G worker and request your paperwork.
    • Your paperwork has the items that were pulls for your reservation.
  3. Check every item. Test every light.
    • Make sure all of the components – some lights have multiple pieces – are present and operational.
  4. There may be discrepancies between what is on your paperwork and the actual order in front of you. Write those discrepancies down on your paperwork and inform an L&G worker of those discrepancies once you’ve checked your entire.
  5. Once we’ve reconciled the discrepancies in our online system, we will printout two copies of your paperwork. Sign both copies. One is for our records. The other is for your records.
    • It may take up to 20 minutes or longer for us to reconcile the discrepancies, please factor that into your pick up time.
    • When returning the gear, use your copy to check and make sure everything is present.
  6. Once you’ve been “greenlit” and signed your paperwork, you are free to load.

Pick up / Return 

  • Until you receive a “green light” from Production Administration, you are not able to check out gear. 
    • In the meantime, we will allow you to check and test your order, but you will not be able to sign off and load.
  • You will pick-up your gear at an approved time, but no sooner than 1 pm.
  • You will return on approved date (typically Mondays) by 12 pm.
  • Sunday returns after 6 pm are possible during peak weeks.
    • Please check with us when those weeks are.
  • If you’re picking up Camera and Sound, start with those two departments before coming to L&G.
    • L&G usually takes substanitably longer to checkout because of the size of the orders are usually much larger.
  • Do not park your grip truck in the loading dock of Comm Arts until you’ve checked and signed off on your gear.
    • Park your grip truck off campus or in Hannon until you’re ready to load.

Cancellations 

We require 24-hour notice prior to pick-up time to cancel an order. Notice less than 24 hours will result in a fine. 

Liability 

The Lighting & Grip Department is not responsible for any liabilities, claims, costs, or expenses arising out of the use or possession of the equipment. All equipment is offered for inspection and testing at the time of pick-up. (see Terms & Conditions section) 

Damage 

All equipment is checked out in good condition and must be returned in the same condition. Any repair work necessary shall be paid by you, or if damage is extensive, replacement cost may be charged. 

 

Skip to content